紫色酸性磷酸酯酶模型化合物水解ATP的研究

紫色酸性磷酸酯酶（PAPS）是含铁的糖蛋白，能够从植物和动物体内分离出来，在微酸性条件下，能催化水解磷酸酯阻］，该类酶具双核铁中心活性部位，每个蛋白有两个铁原子，两个铁原子以ellelll形式存在时，具有催化活性·近年来，人们对研究磷酸酯水解酶感兴趣，是因为这个课题     

The influences of solid-phase organic constituents on the partition of aliphatic and aromatic organic contaminants

The influence of natural organic matter (NOM) constituents on contaminant distribution coefficients was evaluated by determining the Koc values of aromatic and aliphatic organic compounds (solutes) with clays modified with both aromatic- and aliphatic-rich organic constituents. The studied compounds consisted of naphthalene, phenanthrene, n-pentane, and 2,3,4-trimethylmethane; the solid samples comprised two clays with little organic content, kaolinite and Ca-montmorillonite. Two aliphatic surfactants and three aromatic dyes, sorbed to the clays, served as reference NOM constituents. For solutes of comparable water solubilities, the organic-carbon normalized distribution coefficients (Koc) of the aliphatic solutes between sorbed aliphatic organic matter and aqueous solution slightly exceed those of the aromatic solutes. By contrast, the aromatic solutes exhibited higher Koc values than did the aliphatic compounds with sorbed aromatic-rich organic matter. The difference in Koc values could be attributed to either comparable solubility parameters or the difference in the chemical structure between nonionic organic solutes and specific components of the simulated NOM. The much higher Koc values observed for the aromatic solutes indicate that the NOM composition is a major factor determining the NOC environmental distribution.     

Au nanoparticle micropatterns prepared from self-assembled films

A kind of hybrid multilayer film based on mercaptobenzoic acid-capped Au nanoparticles (MBA-Au-NPs) and photoreactive nitrodiazoresin (NDR) has been fabricated via electrostatic self-assembly. Upon exposure to UV light, the initial ionic bonds between the layers of the film convert into covalent bonds and the film stability toward polar solvents, salt, or surfactant solutions increases significantly. The micropatterned NDR/MBA-Au-NP film with the covalently linked architecture was formed by selecting exposure of the film through a photomask and later developed in sodium dodecyl sulfate (SDS) aqueous solution. The metallic Au-NP micropatterns, furthermore, are produced by sintering the micropatterned NDR/MBA-Au-NP film at 550 degrees C, at which the organic components are removed completely. The well-defined micropatterns were characterized with atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), microscope with a charge-coupled device (CCD) camera, and X-ray photoelectron spectroscopy (XPS).     

Determination of drug-protein interactions by microdialysis coupled with liquid chromatography and electrochemical detection based on a nickel hexacyanoferrate modified electrode

Microdialysis sampling coupled with liquid chromatography-electrochemical detection (LC-ED) was developed and applied to determine the interaction of thiopurine (TP) with bovine serum albumin (BSA). A nickel hexacyanoferrate (NiHCNFe) modified electrode was fabricated and used as the working electrode in LC-ED for the determination of TP. Cyclic voltammetric experiments demonstrate that this chemically modified electrode (CME) can effectively catalyze the electrooxidation of TP. The mechanism of the catalytic oxidation of TP at the CME involves an 'EC' process. In the LC-ED, the CME also shows good stability and reproducibility for the determination of TP. The limit of detection is 5.0 x 10(-7) mol l(-1) for 6-TP with a signal-to-noise ratio of 3. The utility of microdialysis as a quantitative sampling technique for in vitro studies of drug-protein interactions was studied. The microdialysis experiments were performed in phosphate buffer solution (pH 7.4) containing different molar ratios of the drug and protein at 37 degrees C. The collected microdialysis sample with unbound TP was analyzed at the NiHCNFe CME in the LC-ED. The relative recovery of TP determined in vitro is 18.3% at a perfusion rate of 1.0 microl min(-1) and the RSD is about 2.1%. The association constant and the number of binding sites on a BSA molecule calculated with the Scatchard equation are 3.72 x 10(-3) (1 mol(-1)) and 1.51, respectively. This method provides a fast, sensitive and simple technique for the study of drug-protein interactions.     

紫外线激活氚原子—制备氚标记单磷酸阿糖腺苷的研究

本文采用紫外线激活氚原子的方法,进行氚-氢同位素交换反应,制得氚标记单磷酸阿糖腺苷(9—~3H—mparaA)。产品的纯度是层析纯;放射性比活度16GBq.m mol~(-1);放射化学纯度92.0%。本法的优点是:交换反应温和、反应时间较短、不易破坏生物活性、引起的副产物少、产品分离和纯化较方便。     

簇合物配基置换反应的研究——Mo3S4(μ-dtp)(η2-dtp)2(η1-dtp)(bpy)的合成与晶体结构

应用X-射线单晶衍射方法, 测定2,2-联吡啶(bpy)和簇合物MO_3S_4(μ-dtp)(dtp)_3(H_2O)(Ⅰ)反应产物褰峁埂ａ果? 产物为Mo_3S_4(μ-dtp)(η~2-dtp)_2(η~1-dtp)(bpy)(Ⅱ), 即联吡啶置换了簇合物(Ⅰ)中的端基(H_2O)和端基(dtp)中的一啮。簇合物(Ⅱ)晶体属三斜晶系。晶胞参数为:a=1.3638(3); b=1.3983(3); c=1.4699(2) nm, a=95.57(2)°, β=91.87(2)°, γ=117.40(2)°; V=2.4676 nm; Z=2; D_C=1.767 g·cm~(-3)。晶体的空间群为P1。最终偏离因子R=0.069, R_w=0.076。本文结合过去对簇合物(Ⅰ)进行的四种不同类型的置换反应的研究, 进行了必要的讨论。并指出本文中的反应是松散本位促进的配基置换反应。     

Solution self-assembly, spontaneous deprotonation, and crystal structures of bipyrazolate-bridged metallomacrocycles with dimetal centers

A series of nanosized cavity-containing bipyrazolate-bridged metallomacrocycles with dimetal centers, namely, {[(bpy)M]8L4}(NO3)8 [L=3,3',5,5'-tetramethyl-4,4'-bipyrazolyl, Pd, Pt; 1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene), Pd; and 1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbiphenyl, Pd], {[(phen)M]8L4}(NO3)8 [L=3,3',5,5'-tetramethyl-4,4'-bipyrazolyl, Pd, Pt; 1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene, Pd; and 1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbiphenyl, Pd], {[(bpy)Pd]6L3}(NO3)6 [L=1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene,], {[(phen)Pd]6L3}(NO3)6 [L=1,4-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene,], {[(bpy)Pd]4L2}(NO3)4 [L=1,3-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene, and 1,2-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene,], and {[(phen)Pd]4L2}(NO3)4 [L=1,3-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene, and 1,2-bis-4'-(3',5'-dimethyl)-pyrazolylbenzene,] (where bpy=2,2'-bipyridine and phen=1,10-phenanthroline) have been synthesized through a directed self-assembly approach that involves spontaneous deprotonation of the 1H-bipyrazolyl ligands in aqueous solution. These complexes, with weak Pd(II)...Pd(II) or Pt(II)...Pt(II) interactions, have been characterized by elemental analysis, 1H and 13C NMR, cold-spray ionization or electrospray ionization mass spectrometry, UV-visible spectroscopy, and luminescence spectroscopy. Complexes and have also been characterized by single-crystal X-ray diffraction analysis.     

Heterocycloaddition of thermally generated 1,2-diaza-1,3-butadienes to [60]fullerene

Stable C₆₀-fused tetrahydropyridazine derivatives were synthesized through the hetero-Diels-Alder cycloaddition of C₆₀ with 1,2-diaza-1,3-butadienes, which were generated in situ by the thermal extrusion of sulfur dioxide from 2,5-dihydro-1,2,3-thiadiazole-1,1-dioxides.     

Construction of diverse peptide structural architectures via chemoselective peptide ligation

Herein, we report the development of a facile synthetic strategy for constructing diverse peptide structural architectures via chemoselective peptide ligation. The key advancement involved is to utilize the benzofuran moiety as the peptide salicylaldehyde ester surrogate, and Dap–Ser/Lys–Ser dipeptide as the hydroxyl amino functionality, which could be successfully introduced at the side chain of peptides enabling peptide ligation. With this method, the side chain-to-side chain cyclic peptide, branched/bridged peptides, tailed cyclic peptides and multi-cyclic peptides have been designed and successfully synthesized with native peptidic linkages at the ligation sites. This strategy has provided an alternative strategic opportunity for synthetic peptide development. It also serves as an inspiration for the structural design of PPI inhibitors with new modalities.

Methods of introducing peptide salicylaldehyde esters and hydroxyl amine functionality into the peptide side chain have been developed. Diverse peptide structural motifs were constructed via ligation with native amide linkages at the ligation sites.     

Complexation of silver and co-recovered metals with novel aza-crown ether macrocycles by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is used to evaluate the metal binding selectivities of an array of novel caged macrocycles for silver, gold, copper, nickel, zinc, iron, lead, manganese and alkali metal ions. It is found that five of the new compounds display silver selectivity, and their relative affinities for various metals depend on the type, number, and arrangement of heteroatoms (N, O), the cavity size, and the presence of aromatic substituents. Alkali metal cation binding studies are used to evaluate the size-selectivities of the cavities of the macrocycles. Electronic structure calculation by B3LYP density function theory methods were used to model the metal complexes. The presence of nitrogen atoms in the macrocyclic ring is essential for silver selectivity over other transition metals and alkali metal ions, and the presence of aromatic groups also enhances silver avidity. Macrocycle 3, a triaza-18-crown-6 analog modified with two phenyl groups and a cage group, is capable of selective extraction of Ag+ from aqueous solutions in the presence of other transition metal ions and the most common alkali and alkaline earth metal ions.